For one professional scrubber use specific cleaning agents that are suitable for mechanical floor cleaning. These are usually neutral detergents, alkaline cleaners for stubborn dirt, or specialist floor cleaners that are compatible with your machine and floor type. The right choice depends on the material of your floor and the degree of contamination.
Why are the right cleaning products important for your scrubber?
The right one cleaning products directly determine the performance of your scrubber and protect your investment at the same time. The wrong products can damage scrub brushes, clog pipes or accelerate machine wear.
Suitable cleaning products ensure optimal cooperation between the mechanical action of your scrub brushes and the chemical cleaning. This results in better cleaning results with less time and energy.
You can also prevent unwanted repairs by choosing products that do not cause foam formation. Too much foam can damage the suction motor and lead to incomplete water absorption during the scrubbing process.
What types of cleaning products can you use in a scrubber?
Neutral detergents form the basis for daily floor cleaning with scrubbers. These products have a pH value between 6 and 8 and are suitable for most floor types without causing damage.
You can use alkaline cleaners on stubborn contamination such as grease, oil or organic stains. These have a higher pH value and are powerful enough for industrial cleaning, but require caution on sensitive floor materials.
You use acidic cleaning agents to remove limescale, rust or mineral deposits. These are especially useful in environments where hard water causes white spots on floors.
| Type of cleaning agent | pH value | Application | Suitable for |
|---|---|---|---|
| Neutral detergent | 6-8 | Daily cleaning | All floor types |
| Alkaline cleaner | 9-12 | Grease and stubborn stains | Concrete, tiles |
| Acidic cleaner | 1-5 | Lime and minerals | Natural stone, tiles |
How do you correctly dose cleaning products in your scrubber?
The right one dosage depends on the degree of contamination of your floor and the manufacturer's instructions. Always start with the recommended dilution on the package and adjust based on the results.
For light daily cleaning, a dilution of 1:100 to 1:200 is usually sufficient. For heavier industrial pollution you can increase this to 1:50 or even 1:20 for very stubborn stains.
Pay close attention to the water temperature, as water that is too hot can make some cleaners less effective. Lukewarm water between 30-40 degrees Celsius usually gives the best results for most detergent scrubber combinations.
Check regularly that you are not using too much product. Excessive dosing not only wastes detergent, but can also cause streaking and accelerate scrub brush wear.
What are the best cleaning products for different floor types?
For concrete floors in industrial environments it is preferable to use alkaline cleaning products that are resistant to the porous structure. These floors can withstand more powerful agents without damage.
It is best to clean tile floors with neutral to slightly alkaline agents. Avoid acidic products when grouting, because they can attack and discolor the grout.
Epoxy floors require mild, neutral cleaners to keep the protective layer intact. Strong chemicals can damage and dull the epoxy coating.
Only use neutral products for linoleum and PVC. These materials are sensitive to strong chemicals that can cause permanent discoloration or damage.
How do you prevent damage to your scrubber due to the wrong products?
Never use household cleaning products in your scrubber. These products often cause too much foam and can damage or clog internal components.
Avoid chlorine bleach and other strong chemicals that can damage rubber parts. This especially applies to hoses, seals and the scrub brushes of your machine.
Always flush the water tank system with clean water after using cleaning agents. Remaining chemicals can crystallize and block pipes.
Regularly check the condition of your scrub brushes and replace them in time. Worn brushes in combination with the wrong agents can scratch sensitive floors.
Store cleaning products according to manufacturer's instructions. Extreme temperatures can change the composition and reduce effectiveness.
Key points for choosing scrubber cleaning products
Selecting the right cleaning products for you industrial cleaning requires attention to both your floor type and your machine specifications. Neutral detergents offer the safest option for everyday use.
Dosage plays an important role in both cleaning results and efficient use. Too little product does not provide sufficient cleaning, while overdosing leads to waste and possible damage.
Preventive maintenance of your scrubber starts with using a suitable floor cleaner and rinsing thoroughly after each cleaning. This significantly extends the lifespan of all parts.
At Metech we are happy to help you choose the right combination of machines and cleaning products. Our experience with an extensive machine park enables us to advise you on the best solution for your specific floor cleaning challenges. Get in touch today for personal advice.