Comac HP6000

The Comac HP6000 is a high-performance street sweeper that combines the performance of two machines in a single machine, ensuring maximum quality results. Roads, parking lots and large squares are currently cleaned with mechanical or suction machines. These two systems are suitable for different types of cleaning: mechanical machines are more suitable for heavier debris and suction machines are more suitable for lighter debris; choosing one or the other system therefore inevitably involves a compromise in terms of the resulting quality.
That is why Comac designed the Twin Action System, a unique technology that combines the power of the mechanical action for collecting larger debris and the efficiency of the suction action for dust, to achieve excellent results with one machine in one pass. The powerful Twin Action System also sucks up fine dust PM10 and reduces water consumption, allowing the machine to be used even in the most difficult conditions.

The mechanical action consists of the movement of the central brush (1) which collects the material from the ground and brings it to a hopper where it is shredded by the hammers of a rotating shaft (2). At this point, the suction action (3) moves the material to the collection hopper (4), while the sucked air is filtered (5) and returned perfectly clean to the environment (6).

Flexibility in use

The Twin Action system makes it possible to work even on bumpy road surfaces: tree roots or protruding pits pose no problem. No rigid element (support wheel of the squeegee or metal support plates) comes into contact with the ground, so no breakage or excessive wear can occur during work; only the central brush touches the ground and, thanks to its characteristics, it smoothly follows the profile of the surface.
In addition to urban environments, the HP6000 can also be used successfully in cleaning stages before asphalt paving, on road construction sites and in industrial environments, including metallurgical plants and cement plants. The HP6000 makes continuous use of the central brush, ensuring higher quality cleaning because it is uniform across the entire width of the brush, and higher productivity because it can clean faster than a conventional vacuum sweeper that must use the two side brushes.
The technical solutions chosen, such as the hydraulic support and the presence of the valves, ensure constant pressure on the ground for the brush, regardless of wear or terrain. Moreover, the machine can be positioned at 3 height levels, allowing the removal of different types of waste: leaves, pine needles, bottles, etc.

The Comac HP6000 is available with a wide range of options, including a high pressure sprayer, third sweeping brush, vacuum hose, air conditioning, spray system and more. Want to know more about this street sweeper or receive the brochure? Then contact us, we would love to tell you more about it!